Description
Dimensions
| d | 530 mm | Bore diameter |
|---|---|---|
| D | 650 mm | Outside diameter |
| B | 72 mm | Width |
| d1 | ≈ 570 mm | Shoulder diameter of inner ring |
| D1 | ≈ 614 mm | Shoulder diameter of outer ring |
| F | 560.5 mm | Raceway diameter of inner ring |
| r1,2 | min. 3 mm | Chamfer dimension |
| s | max. 0.5 mm | Permissible axial displacement |
Abutment dimensions
| da | min. 543 mm | Diameter of spacer sleeve |
|---|---|---|
| da | max. 554 mm | Diameter of spacer sleeve |
| db | min. 575 mm | Diameter of shaft abutment |
| Da | max. 637 mm | Diameter of housing abutment |
| ra | max. 2.5 mm | Radius of fillet |
Calculation data
| Basic dynamic load rating | C | 1 170 kN |
|---|---|---|
| Basic static load rating | C0 | 2 700 kN |
| Fatigue load limit | Pu | 212 kN |
| Reference speed | 900 r/min | |
| Limiting speed | 1 200 r/min | |
| Minimum load factor | kr | 0.05 |
| Limiting value | e | 0.3 |
| Calculation factor | Y | 0.4 |
Tolerances and clearances
General bearing specifications
- Tolerances: Normal (), P6, Normal (inch)
- Radial internal clearance: cylindrical bore, tapered bore
- Axial internal clearance: NUP, NJ + HJ
Bearing interfaces
- Seat tolerances for standard conditions
- Tolerances and resultant fit
Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and one on the inner ring, NJ design bearings can accommodate axial displacement in one direction. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
- High radial load carrying capacity
- Low friction
- Long service life
- Locate the shaft axially in one direction
- Separable design
